Makita HR4013C 1-9/16 in. AVT SDS-Max Rotary Hammer

Makita HR4013C.  Features: Powerful 11 amp motor delivers 8.4 ft.lbs. of impact energy to handle the most demanding applications. Anti-Vibration Technology (AVT) is a synchronized, three-component system that more effectively reduces vibration resulting in a low 5m/s2. Air actuated counterbalance directs air pressure from the crank and barrel room into the counterbalance cylinders to move counterweight pistons in the opposite direction of the drive piston actively reducing vibration. Vibration absorbing housing features a spring loaded main handle and upper housing that move independently of the motor and drive mechanism effectively isolating most of the vibration away from the user. Integrated damper spring at the base of the impact bolt is engineered to absorb impact vibrations from the drill bit. Lock-on or trigger activation in “Chipping Only” mode with a push button start/stop control for more convenient operation. Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs. Soft start suppresses start-up reaction for more control and better accuracy. L.E.D. service light notifies the user approximately 8 hours before the brushes need to be replaced. L.E.D. power light indicates switch failure or cord damage. Variable speed control dial enables user to match the speed to the application for greater versatility. Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds. Sequential impact timing delivers timed hammering during rotation to minimize overlapping bit impacts for up to 50% faster drilling. Automatic brush cut-off protects commutator from damage for longer tool life. 2-mode operation for “Chipping Only” or “Hammering with Rotation.

• Makita has expanded its line-up of concrete hammers with a new 1-9/16 in. AVT Rotary Hammer that has 45% less vibration and 20% more impact energy than the previous model. The new HR4013C is engineered with enhanced Anti-Vibration Technology (AVT), which is a synchronized three-component system for significantly less tool vibration. Additional features include constant speed control that automatically applies additional power to the motor to maintain speed under load, soft start for more control and greater accuracy, and a torque-limiting clutch. The HR4013C offers 2-mode operation for “chipping only” or “hammering with rotation”, as well as 24 bit angle settings and a one-touch sliding chuck for quick bit changes.

Features

• Powerful 11 amp motor delivers 8.4 ft.lbs. of impact energy to handle the most demanding applications
• Anti-Vibration Technology (AVT) is a synchronized, three-component system that more effectively reduces vibration resulting in a low 5m/s2
• Air actuated counterbalance directs air pressure from the crank and barrel room into the counterbalance cylinders to move counterweight pistons in the opposite direction of the drive piston actively reducing vibration
• Vibration absorbing housing features a spring loaded main handle and upper housing that move independently of the motor and drive mechanism effectively isolating most of the vibration away from the user
• Integrated damper spring at the base of the impact bolt is engineered to absorb impact vibrations from the drill bit
• Lock-on or trigger activation in “Chipping Only” mode with a push button start/stop control for more convenient operation
• Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs
• Soft start suppresses start-up reaction for more control and better accuracy
• L.E.D. service light notifies the user approximately 8 hours before the brushes need to be replaced
• L.E.D. power light indicates switch failure or cord damage
• Variable speed control dial enables user to match the speed to the application for greater versatility
• Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds
• Sequential impact timing delivers timed hammering during rotation to minimize overlapping bit impacts for up to 50% faster drilling
• Automatic brush cut-off protects commutator from damage for longer tool life
• 2-mode operation for “Chipping Only” or “Hammering with Rotation

Includes

• 1-9/16 in. AVT SDS-Max Rotary Hammer – HR4013C
• Side Handle – 196792-8
• Side Grip Assembly – 123138-5
• Depth Rod – 331955-1
• Bit Grease – 194683-7
• Wiping Cloth

Specifications

• Power Source: Corded
• Impact Energy: 8.4 ft-lbs
• Cord Length(ft.): 15.6 in
• Blows Per Minute(BPM): 1450 – 2900
• Amperage: 11
• UL Safety: Yes
• No-Load Speed (RPM): 250 – 500
• CSA Safety: No
• Wifi compatibility: No
• Chuck Size: 1-9/16 in
• Case Included: No
• Bluetooth Compatibility: No
• Motor Type: Brushed
• Voltage: 120V
• Handle Type: D
• Charger Included: No
• Chuck Type: SDS-Max
• ETL Safety: No
• Series: AVT
• Length: 18.69 in.
• Width: 4.38 in.
• Height: 10.38 in.
• Weight: 15.1 lbs.